Table of Contents

Toggle

Hornady Brass 6.5 Grendel | Hornady Brass 6.5 Grendel for sale|Hornady Brass 6.5 Grendel Box of 50

Hornady produces brass with the same precision, attention to detail, and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, test pressure calibration to ensure uniform case expansion and hand-inspect each piece. Hornady Brass 6.5 Grendel at gun shack ammo

This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition. Hornady Brass 6.5 Grendel for sale in stock

 

Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case of cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stains might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases, you may notice the case mouths to be slightly belled. Hornady Brass 6.5 Grendel 2022

With all-new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

Made In the United States of America

6.5 GRENDEL RIFLE BRASS | 6.5 GRENDEL RIFLE BRASS for sale

Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand-inspected to guarantee the highest quality possible.

Starline Brass is located in Sedalia, MO, and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed, and chamfered before loading.

Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case of cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stains might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases, you may notice the case mouths to be slightly belled. 6.5 Grendel brass

Hornady Brass 6.5 Grendel in bulk 2024

With all-new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

If you are using nickel-plated brass, special care must be taken to lubricate the cases prior to sizing them.  Nickel plating is harder than brass and the cases require more effort in sizing.  In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers, or other common household tools that could damage your sizing die.

Specifications and Features::

• Tight tolerances for concentricity
• Controlled wall thickness
• Correct sizes lot to lot
• Small Rifle Primer